- Two modes of selection: Air Cooling mode or Water Cooling mode.
- Removable motherboard and PSU bracket for easier installation.
- CPU and GPU spaces are adjustable.
- 3-slot rear panel is replaceable (Maximum GPU Width: 72mm, 3.65 slots).
- Supports a 12cm or 14cm fan.
- Supports a 240mm water cooling.
- PSU can be installed upside down.
|Materials||Aluminum, Steel (SPCC)|
|Case Dimensions||150x240x345mm (W x H x D) *Excluding foot pad and rear protrusions|
|Case Volume||12.4 L|
|I/O Ports||1x USB 3.2 Gen 1 Type-C|
|CPU Cooler||Maximum Height : 58mm or 68mm
*When the height of the CPU cooler is 58mm, the maximum allowable thickness of the GPU is 65mm.
|GPU||Maximum GPU Length : 330mm
*If installing a 3.5″ HDD, the GPU maximum length is 305mm.Maximum GPU Height : 150mm
Maximum GPU Width (thickness) : 55mm, 2.75 Slots or 65mm 3.25 Slots
*Installing a graphics card requires the use of a PCIE Riser Cable.
*If your gpu length exceeds 65mm (3.25 slots), then you will need to make an additional purchase for a 3 slots rear panel
|Drives||1 x 2.5″ SSD or 1 x 3.5″ HDD|
|Case Fan||Top : 2x 120mm, 2x 140mm,
Bottom : 2x 120mm, 2x 140mm
Maximum Height : 25mm
|Power Supply Type||SFX / SFX-L|
|Radiator||1x 240 Radiator
Maximum Radiator Height : 27mm
Maximum Fan Height : 25mm
*If you will install a 30mm thickness radiator and 25mm fan, the motherboard and PSU bracket were need to be removed.
|PCI-E Riser||Length : 180mm|
What’s in the box