HDD installation for MX200/MX210

HDD installation for MX200/MX210

HDD installation area 1 
硬碟1安裝方式 (右方)

Install the HDD in the middle plate of the motherboard, then install the HDD bracket

HDD installation area 2
硬碟2安裝方式 (右下方)

▼STEP 1
Install the 2.5″ or 3.5″ HDD on the HDD bracket  first
* Unless you install two HDD, then you will need to use the 2 bay HDD holder

先將硬碟(2.5″ or 3.5″)安裝到硬碟支架上.
*如果要安裝兩顆硬碟才需要使用到硬碟擴充支架.

 

▼STEP 2
Then install the HDD bracket in the lower right side of the aluminum frame
將硬碟支架安裝到右下方鋁框架上.

 

MX200/MX210 PSU Cover Installation Guide

MX200/MX210 PSU Cover Installation Guide

Install the PSU cover

安裝電源擋板

 

▼ Install the nuts on the PSU cover with screws

使用螺絲將螺母安裝到電源擋板上

 

▼ Install the aluminum extrusions

安裝鋁擠

 

▼ Install the power supply first, then install the rest of the components

先安裝電源供應器然後再安裝其他硬體


 

Tips:

安裝提示 : 

IIf you already install the hardwares before installing the PSU cover, you will need to remove the bottom cover and power supply first

如果已經先安裝硬體後再安裝電源擋板,需要先將底蓋卸下並取下電源後才能安裝.

MX200/210 Installation Guide

MX200/210 Installation Guide

Before installing, please refer to the Aluminum Extrusions installation guide first.
安裝前請務必先閱讀鋁擠安裝說明.

▼Types of Screws​

01. Screws for fan mount (Optional)

02. Screws for Side panel

03. Screws for power supply / 3.5″ SSD

04. 8mm standoff for motherboard mount

05. Nuts for aluminum extrusions

06. Screws for GPU mount

07. Screws for foot pad

08. Screws for standoff, nuts and 2.5” SSD

09. Screws for motherboard mount

10. Screws for 240mm fan grill

▼Step 1. Install the aluminum extrusions on rear cover with #8 screws x 4

▼Step 2. Install the motherboard plate on aluminum extrusions with #8 screws x 5 and #5 nuts x 5

▼Step 3. Install the front aluminum extrusions with L type brackets and #8 screws x 6 and #5 nuts x 6

▼Step 4. Install the foot pad on the bottom cover with #7 screws x 4

▼Step 5. Install the bottom cover with #8 screws x 4 and #5 nuts x 4

▼Step 6. To install the hardware

After step 5, we suggest that you can start to install hardware then move to step 7

 

▼Step 7. Install the top cover with #8 screws x 4 and #5 nuts x 4 first and then install the top fan grill plate with #10 screws x 6

▼Step 8. Install the front plate and the power switch with #8 screws x 6 and #5 nuts x 2

▼Step 9. Install the USB Module

 

▼Step 10. Install the left and right side rear panels with #2 screws x 10 and #5 nuts x 10

Shopping Cart
There are no products in the cart!
Subtotal
$0.00
Total
$0.00
Continue Shopping
0