HDD installation for MX200/MX210

HDD installation for MX200/MX210

HDD installation area 1 
硬碟1安裝方式 (右方)

Install the HDD in the middle plate of the motherboard, then install the HDD bracket

HDD installation area 2
硬碟2安裝方式 (右下方)

▼STEP 1
Install the 2.5″ or 3.5″ HDD on the HDD bracket  first
* Unless you install two HDD, then you will need to use the 2 bay HDD holder

先將硬碟(2.5″ or 3.5″)安裝到硬碟支架上.
*如果要安裝兩顆硬碟才需要使用到硬碟擴充支架.

 

▼STEP 2
Then install the HDD bracket in the lower right side of the aluminum frame
將硬碟支架安裝到右下方鋁框架上.

 

A30 Installation Guide V1.1

A30 Installation Guide V1.1

▼Component​ list

Before installing, please refer to the Aluminum Extrusions installation guide first.
安裝前請務必先閱讀鋁擠安裝說明.

▼1-1 Install 40mm and 10mm standoffs on the upper left panels

▼1-2 Install 25mm standoffs on the lower left panel. * Before choosing the hole to install the GPU extension cable, please check the distance of the GPU extension cable first * 
(請依據您的GPU延長線的距離來選擇安裝的孔位,建議可以先拿GPU延長線來核對.)

▼Step 2.

Install the black hexagonal threaded spacer on 250mm aluminum extrusions.  

安裝(12)黑色塑膠銅柱到250mm鋁擠上

▼Step 3.

Install the left panel on the aluminum extrusions

將左側壓克力板安裝到鋁擠上

▼Step 4.

Install the right panel on the aluminum extrusions

將右側壓克力板安裝到鋁擠上

▼Step 5.

Install the step 3 and step 4  semi-finished parts on the rear panel

將左側及右側部分固定到後面板

▼Step 6.

Install the foot pad

安裝腳墊

▼Step 7.

Install the bottom cover

安裝底蓋

▼Step 8.

Install the front USB cable

安裝前置USB線

▼Step 9.

Install the power supply

安裝電源供應器

▼Step 10.

Install the 2.5″ HDD

安裝2.5″硬碟

 

▼Step 11.

Install the PCI-Extension cable (optional purchase)

安裝PCI-E延長線(選購)

▼Step 12.

Install the motherboard (Before installing the motherboard, please install the CPU, CPU cooler and RAM, etc.)

安裝主機板 (安裝主機板前請先安裝CPU,CPU散熱器,記憶體等)

▼Step 13.

Install the GPU holder

安裝GPU固定板

▼Step 14-1.

Install the GPU

安裝GPU

▼Step 14-2.

Fix the GPU by pressing down the GPU support holder

固定GPU.

 

▼Step 15.

Install the fan and 160mm fan grill

安裝機殼風扇及160mm風扇網格

▼Step 16.

Install the top panel

安裝上面板

▼Step 17.

Install the power switch and front panel

安裝開關及前面板

 

▼Step 18.
Install the left and right panel
安裝左側板及右側板

MX200/MX210 PSU Cover Installation Guide

MX200/MX210 PSU Cover Installation Guide

Install the PSU cover

安裝電源擋板

 

▼ Install the nuts on the PSU cover with screws

使用螺絲將螺母安裝到電源擋板上

 

▼ Install the aluminum extrusions

安裝鋁擠

 

▼ Install the power supply first, then install the rest of the components

先安裝電源供應器然後再安裝其他硬體


 

Tips:

安裝提示 : 

IIf you already install the hardwares before installing the PSU cover, you will need to remove the bottom cover and power supply first

如果已經先安裝硬體後再安裝電源擋板,需要先將底蓋卸下並取下電源後才能安裝.

A30 Installation Guide

A30 Installation Guide

▼Component​ list

01. 40mm standoff for motherboard mount x 4

02. 25mm standoff for PCI-E extension adapter riser cable mount x 2

03. 10mm standoff for front usb cable mount x 2

04. Screw for power supply / 3.5″ SSD x 5

05. Screw for fan mount (Optional) x 8

06. Nuts for aluminum extrusions x 34

07. M3 x 10mm screw for Motherboard  x 4
; the other 2 screws + 5mm standoff x 2 for GPU mount    

08. M3 x 8mm Screw for standoff and 2.5” SSD x 15

09. M4 x 8mm Screw for nuts x 39

10. Screw for motherboard mount x 8

11. Screw for 160mm fan grill x 6

12. Black Hexagonal Threaded Spacer x 1

A. 300mm aluminum extrusions x 6

B. 250mm aluminum extrusions 

C. Front usb cable

D. GPU support holder

E. 3.5″ HDD bracket
F. power switch

Before installing, please refer to the Aluminum Extrusions installation guide first.
安裝前請務必先閱讀鋁擠安裝說明.

▼Step 1.

Install 40mm/25mm and 10mm standoffs on the left panels:
(1) Install 40mm standoffs with #7 screws (2) Install 25mm and 10mm standoffs with #8 screws

安裝40mm/25mm/10mm銅柱到左側壓克力板, (1) 40mm銅柱使用7號螺絲固定, (2) 25mm及10mm銅柱使用8號螺絲固定

▼Step 2.

Install the black hexagonal threaded spacer on 250mm aluminum extrusions

安裝(12)黑色塑膠銅柱到250mm鋁擠上

▼Step 3.

Install the left panels on the aluminum extrusions with #9 screws and #6 nuts

將左側壓克力板安裝到鋁擠上

▼Step 4.

Install the right panels on the aluminum extrusions with #9 screws and #6 nuts

將右側壓克力板安裝到鋁擠上

▼Step 5.

Install the step 3 and step 4  semi finished parts on the rear panel with #9 screws

將左側及右側部分固定到後面板

▼Step 6.

Install the foot pad

安裝腳墊

▼Step 7.

Install the bottom cover with #9 screws and #6 nuts

安裝底蓋

▼Step 8.

Install the front USB cable with #10 screws and power supply with #4 screws

安裝前置USB線及電源供應器

▼Step 9.

Install the 2.5″ HDD

安裝2.5″硬碟

▼Step 10.

Install the PCI-Extension cable with #10 screws (optional purchase)

安裝PCI-E延長線(選購)

▼Step 11.

Install the motherboard with #10 screws (Before installing the motherboard, please install the CPU, CPU cooler and RAM, etc.)

安裝主機板 (安裝主機板前請先安裝CPU,CPU散熱器,記憶體等)

▼Step 12.

Install the GPU holder with #7 screws

安裝GPU固定板

▼Step 13.

Install the 2nd 2.5 inch HDD holder (optional step), if you need to install HDD, please use #8 screws

安裝第二顆2.5″硬碟支架(選擇性安裝), 如需要安裝硬碟請使用8號螺絲

▼Step 14.

Install the GPU

安裝GPU

▼Step 15.

Install the fan with #5 screws and 160mm fan grill with #11 screws

安裝機殼風扇及160mm風扇網格

▼Step 16.

Install the top panel with #9 screws and #6 nuts

安裝上面板

▼Step 17.

Install the power switch first and then install the front panel with #9 screws and #6 nuts

安裝開關及前面板

▼Step 18.
安裝左側板及右側板

MX110 Installation Guide

MX110 Installation Guide

▼Types of Screws​

 

01. Screws for fan mount (Optional)

02. Screws for Side panel

03. Screws for power supply / 3.5″ SSD

04. Sstandoff for motherboard mount

05. Nuts for aluminum extrusions

06. Screws for GPU mount

07. Screws for foot pad

08. Screws for standoff, nuts and 2.5” SSD

09. Screws for motherboard mount

10. Screws for 240mm fan grill

Before installing, please refer to the Aluminum Extrusions installation guide first.

安裝前請務必先閱讀鋁擠安裝說明.

▼Step 1.​ Install the aluminum extrusions on the rear panel with #8 screws

▼Step 2. Install the motherboard plate on the aluminum extrusions with

#8 screws and #5 nuts

▼Step 3. Fasten #4 standoffs and #8 screws on the motherboard plate

▼Step 4. Install the aluminum extrusions with #8 screws, #5 nuts and L-type brackets

▼Step 5. Fasten the foot pad on the bottom cover with #7 screws

▼Step 6. Install the bottom cover with #8 screws and #5 nuts

 

After step 6, we suggest you can start to install hardware and then move to step 7

 

 

 

▼Step 7.Install the 240mm fan grill on the top panel with #10 screws, after this step, install the top cover with #8 screws and #5 nuts

▼Step 8.Install the power switch first and then install the front panel with

#8 screws and #5 nuts

 

▼Step 9.​ ​Install the USB Module

 

 

▼Step 10. Install the left and right rear panels with #2 screws and #5 nuts

Shopping Cart
There are no products in the cart!
Continue Shopping
0