Rated 4.43 out of 5 based on 7 customer ratings
(7 customer reviews)


This is the Pre-Order Product, the estimated shipping date is December. 17, 2018.
  • Additional purchase :
    • 4.9 $
    • 1 $
    • 3.5 $
SKU: N/A Category:


Model : A30
Available Color : White (White+Smokd) | Black (Black+Smokd) | White+Black (White+Black)
Materials : Acrylic, Aluminium Extrusion
Dimensions  : 274*244*124mm
Motherboard : Mini-ITX
Drives : 2.5″ HDD/SSD x 2, 3.5″ x1 (Optional)
Front ports : USB 3.0 , USB 2.0 , HD Audio , MIC
Expansion Slots : 2
Cooling System  : 80mm fan x2 (Optional)
Power Supply Type : Standard Flex ATX


CPU Cooler
Support up to 50mm height

Support Dual Full Size GPU
Support up to 211mm length

GPU Extension Cable
Suggest length: 300mm

2.5” Drives
Front drive maximum height: 15mm
Side drive maximum height: 9mm

Support Flex ATX PSU : 81.5 mm (W) x 40.5 mm (H) x 150 mm (D)
Support up to 180mm length

What's in the box

1 x A30 DIY Kit (Exclude PSU Cover)
1 x Front USB 3.0 x1 , USB 2.0 x1 , Audio , Mic Cable
1 x 16mm Power switch (Blue LED)
4 x Foot pad
1 x Screws


Front I/O ports changed to USB 3.0 x 1, USB 2.0 x 1
GPU card installation position adjustment

GPU installation changed

Few screws changed



7 reviews for A30 MINI-ITX CASE

  1. Rated 3 out of 5


    First off, I really like this case. The layout is fantastic and cable management with the custom Geek cables was easy. I also ordered the custom psu which was really convenient and reasonably priced. The case was difficult to put together and probably would have been impossible without using the instructions which can only be found on the Geeek website. This case is mostly plastic, the power button has a really nice click to it. Lots of little screws. My motherboard, psu, graphics card, and SSDs fit nicely into the case. Two SSDs can be mounted inside if your graphics card isn’t too big. Although difficult to put together, it is very easy to work with. Unfortunately for me one of the side panels I received, the one that holds the fans, was not aligned properly and one of the screws cannot be screwed in. I could probably drill it out but the white part of the panel would still not be level. I wouldn’t say that it effects the function of the case, but it definitely affects its aesthetics. I sent Geeek an email to see if they could send me a replacement and they responded quickly asking for pictures. After sending the pictures I have not heard back from them. It has been 8 days and I have still not heard anything. I ordered this case from the TW store and had to pay international shipping for it. I would recommend this case to US buyers when or if it becomes available in the US because of the increase in price due to international shipping and the lack of customer service.

  2. Rated 5 out of 5


    Receive A30 first batch amazing case for mini-itx form factor. Good service with the team!

  3. Rated 5 out of 5


    The GOOD :Hi! The Dream ITX !! This Case is the Best Itx case for the Money ! Its my fist time in the Acrylic case. I would like to see it in Aluminium. It can compete wit others Itx like Dan A4 . It seen so little, Yet Powerful !! 4K Video games can run !!! It can fit Nvidia 1080 TI gtx mini. Very portable you can travel with it to any place and looks amazing with leds!! buy it!!
    The Bad: It seen very delicate and can scratch easily.
    The Ugly: There A lot of screws and steps to actually join all the parts !

  4. Rated 4 out of 5


    Overall, great aesthetic, but unfortunately manufacturing and small details (like lack of countersunk holes) detracts from the otherwise great design.

  5. Rated 5 out of 5


    Ideal Mini ITX case, small PSU inside, very good cooling and air-flow.

    About GPU compatibility: please notice if you have GPU with power connector at top (opposite to PCI-express slot) it can interfere with one on motherboard mounting screw. But still it is stable when you are using 3of4 screws 🙂

  6. Rated 5 out of 5


    OMG. This case fit for gtx 1070ti(Zotac mini) and 1080ti(zotac mini).

  7. Rated 4 out of 5


    Pretty nice case. Instructions were straight forward, pictures were accurate, just like building Ikea furniture. Some of the screws were a bit difficult to actually get in. For example the screws on the top panel almost had to be forced in, they fit but even then they weren’t flush since there were not countersunk.

    I was able to fit Zotac’s 1070ti mini in here, just needed to remove the front 2.5″ mounting plate first. Like others have said, the power connector for the GPU does interfere with one of the motherboard mounting screws if it is located opposite of the PCIe slot and away from the IO panel.

    Otherwise the case is generally not too bad to assemble (first time build), I can tell they use space very efficiently. That said, there are very low tolerances for GPU length.

    Note 1: I had a 3.5″ that I was planning to use but if mounting a GPU you basically cannot also mount a 3.5″ drive. A little disappointing, but expected.

    Note 2: The PCIe rise that I got as an add-on does not mount to the holes in the instructions. But there’s a set of screw holes right below the instructed ones. Just take note of that. They might be a little bit off though, because I had trouble securing the GPU to the back of the case, but maybe that’s normal?

Only logged in customers who have purchased this product may leave a review.