Before installing, please refer to the Aluminum Extrusions installation guide first.

安裝前請務必先閱讀鋁擠安裝說明.

01.Screws for foot pad mount

02. Screws for fan mount (Optional)

03. Screws for power supply / 3.5″ SSD

04. 8mm standoff

05. Nuts for aluminum extrusions

06. Screws for GPU mount

07. Screws for standoff, nuts and 2.5” SSD

08. Screws  for acrylics

09. Screws for motherboard mount

10. 10mm standoff for motherboard mount

▼Step 1. Fasten the 10mm standoffs x 4 on the motherboard plate with #7 screws x 4

Note: There are 2 type of standoffs: 8mm and 10mm, in this step, please use 10mm standoffs

▼Step 2. Install the right side aluminum extrusions on the back of the motherboard plate​ with #7 screws x 12 and #5 nuts x 12

▼Step 3. Install the left side extrusions​ (short ones) with #7 screws x 6 and #5 nuts x 6; (long ones) with #7 screws x 12 and #5 nuts x 12

Note: There are 2 type of acrylics: 3mm and 5mm. 3mm acrylics must be installed on the top

▼Step 4. Install the foot pad​ on the bottom cover with #1 screws x 4

Note: No difference for the 2 side panel (face up, face down side), you can install the HDD according to your demand

▼Step 5. Install bottom cover / 80mm fan bracket / 120;240mm fan bracket / power brackets

5-1 Install the bottom cover with #5 nuts x 6 and #7 screws x 6

5-2 Install the 80mm top fan bracket first with #5 nuts x 4 and #7 screws x 4

5-3 Install the 120mm fan bracket with #5 nuts x 4 and #7 screws x 4

5-4 Install the power brackets with #5 nuts x 2 and #7 screws x 2

▼Step 6. Install the power switch on the rear panel and then install the rear panel on the main body with #7 screws x 4 and #5 nuts x 4

Note: You can align the

▼Step 7. Install the hardware​

After step 6, we suggest that you can start the hardware installation and then move to step 8

 

▼Step 8. Optional step, you can install according to personal preference

Install the #4 standoffs on 240mm fan bracket with #7 screws x 4 and then fasten the front grill plate with #9 screws x 4

▼Step 9. Install the front panel with #7 screws x 4 and #5 nuts x 4

▼Step 10. Install the caps​ with #8 screws x 12

▼Step 11. Install the left/right side panels with #8 screws x 12 and #5 nuts x 12