▼Component​ list

Before installing, please refer to the Aluminum Extrusions installation guide first.
安裝前請務必先閱讀鋁擠安裝說明.

▼1-1 Install 40mm and 10mm standoffs on the upper left panels

▼1-2 Install 25mm standoffs on the lower left panel. * Before choosing the hole to install the GPU extension cable, please check the distance of the GPU extension cable first * 
(請依據您的GPU延長線的距離來選擇安裝的孔位,建議可以先拿GPU延長線來核對.)

▼Step 2.

Install the black hexagonal threaded spacer on 250mm aluminum extrusions.  

安裝(12)黑色塑膠銅柱到250mm鋁擠上

▼Step 3.

Install the left panel on the aluminum extrusions

將左側壓克力板安裝到鋁擠上

▼Step 4.

Install the right panel on the aluminum extrusions

將右側壓克力板安裝到鋁擠上

▼Step 5.

Install the step 3 and step 4  semi-finished parts on the rear panel

將左側及右側部分固定到後面板

▼Step 6.

Install the foot pad

安裝腳墊

▼Step 7.

Install the bottom cover

安裝底蓋

▼Step 8.

Install the front USB cable

安裝前置USB線

▼Step 9.

Install the power supply

安裝電源供應器

▼Step 10.

Install the 2.5″ HDD

安裝2.5″硬碟

 

▼Step 11.

Install the PCI-Extension cable (optional purchase)

安裝PCI-E延長線(選購)

▼Step 12.

Install the motherboard (Before installing the motherboard, please install the CPU, CPU cooler and RAM, etc.)

安裝主機板 (安裝主機板前請先安裝CPU,CPU散熱器,記憶體等)

▼Step 13.

Install the GPU holder

安裝GPU固定板

▼Step 14-1.

Install the GPU

安裝GPU

▼Step 14-2.

Fix the GPU by pressing down the GPU support holder

固定GPU.

 

▼Step 15.

Install the fan and 160mm fan grill

安裝機殼風扇及160mm風扇網格

▼Step 16.

Install the top panel

安裝上面板

▼Step 17.

Install the power switch and front panel

安裝開關及前面板

 

▼Step 18.
Install the left and right panel
安裝左側板及右側板